Printable PDF

Contact Caen regarding this unit!

Support and Warranty

Features
 Up to 14.4 TB of Storage Capacity
 36 Hot-Swappable Serial ATA Hard Drives
 Dual Intel® Xeon™ Processors (up to 3.06 GHz)
 Up to 16 GB Two-Way Interleaved DDR SDRAM
 512 KB L2 Cache
 Six PCI-X-133/100 Slots
 3Ware® 8500 Series Serial ATA RAID Cards
 Dual Gigabit Ethernet Ports
 Redundant Power/Failover

Benefits
 Cost effective Serial ATA solution
 High performance and scalability
 Low total cost of ownership
 High density design conserves space
 Hot-swappable components for assured reliability
 Ease of management

Wasabi Software
Standards Compliance
Supports IETF iSCSI RFC, draft 20,

Error recovery levels 0

Supported Processors
Intel® XScale, IA32 and compatible (Pentium IV and Xeon processor) AMD Athlon X86 processor families and compatibles

Certified Reference Platforms

Certified Reference Platforms
Xeon: Intel SE7501HG2
Intel SE7501BR2
Intel SE7501WV2
Intel SE7501CW2
SuperMicro X5DPA-GG
Supermicro X5DP8

Memory Requirements Minimum recommended: 512 MB Maximum supported: 4 GB Full memory utilization to cache iSCSI block data

Supported hardware
SCSI, IDE, and Serial ATA controllers from Intel, Adaptec, and others Leading NICs and networking chipsets Leading SCSI and Serial ATA RAID cards from Intel, Adaptec, and others Multiport Ethernet cards:
Intel Ethernet Controller 85246, Intel Pro1000 XT, MT Intel and other leading iSCSI accelerator HBAs

Supported Networking
Gigabit Ethernet or 10/100 Ethernet (single or multi-port) TCP/IP v4 SLP and iSNS for iSCSI target discovery

Supported Volume Manager Features Span/chaining, RAID levels 0, 1, 4, 5, 10, 50 Support for volumes in excess of 1,000 terabytes Volumes may be partitioned into multiple virtual iSCSI disk nodes

Security
CHAP authentication, Password-protected web-based management

Administration
Web-based, password-protected user interface. Features configuration of network parameters, and configuration and management of virtual volumes and intelligent RAID controllers. Also provides “Expert Mode” for fine-tuning of iSCSI parameters. All supported features are configured through this graphic user interface. Configuration software is modular and can be extended using plug-ins.

Compatibility
Compatible with Cisco, UNH, and Microsoft software initators Compatible with Intel PRO/1000 T IP Storage Adapter Compatible with all other iSCSI Draft 20-compliant initiators Platform-agnostic: The Caen OS Kernel is the only module that needs to be ported to a different hardware architecture.

Hardware
System Drives
ATA/133 IDE 40 GB to 250 GB (5400RPM)
ATA/133 IDE 40 GB to 250 GB (7200RPM)
Slim CD-ROM/1.44”

RAID
RAID levels 0, 1, 5, 10, 50
Three 3Ware Escalade 8500 Serial ATA controllers
12 drives supported per controller
Support for 36 drives with 3 RAID
controllers

CPU
Intel® Dual Xeon (up to 3.2GHz)

Cache
512kb Integrated On-Die Level 2

Bus Speed
Up to 533 MHz

Motherboard
Dual Xeon Serverboard

Memory
Up to 16 GB of DDR-200 SDRAM

On-board Devices
Dual Ultra ATA/100 IDE channels
Two Intel® 82544 Gigabit Ethernet (copper)
On-board SVGA video

Expansion Ports
Two Fast 165550 UART Serial Ports
One ECP/EEP Parallel Port, USB 2.0 connectors
PS/2 Keyboard and Mouse connectors

Power Saving Features
APCI/APM power management
One Wake-On-Lan connector
Internal/External Modem Ring-on

Power Requirements
1200W 3+1 power supplies
Requires (2) 100-120V 50-60Hz AC @ 3A inputs

Cooling
(6) 200 CFM fans and (2) 87 CFM fans

Chassis
Rackmount version
Dimensions: 4U - 17.1”(w) x 30”(d) x 7” (h)

Warranty and Service
Two year return-to-manufacturer parts and labor
Two year 8x5x5 phone support