About Caen | Job Opportunities | Partners | Support Center | Contact Us   



    Search:
   

Call (866) 651-6036
for sales, support or service






home > products > RAID solutions > iSCSI RAID

iSCSI 1600

All PDF forms require the free Adobe Acrobat Reader.


Printable PDF

Contact Caen regarding this unit!

Support and Warranty

 

Features
 Up to 6.4 TB of Storage Capacity
 16 Hot-Swappable Serial ATA Hard Drives
 Dual Intel® Xeon™ Processors (up to 3.2 GHz)
 Intel® E7501 Chipset
 Up to 16 GB Two-Way Interleaved DDR SDRAM
 512 KB L2 Cache
 3Ware® 8506 Series Serial ATA RAID Cards
 Dual Gigabit Ethernet Ports
 Redundant Power/Failover

Benefits
 Cost effective Serial ATA solution
 High performance and scalability
 Low total cost of ownership
 High density design conserves space
Hot-swappale components for assured reliability
 Ease of management

Overview
Wasabi Storage Builder™ for iSCSI Appliances is a compact flash based solution that enables OEMs to produce high-performance native iSCSI target appliances. Modular, scalable, and able to run on off-the-shelf components, Wasabi Storage Builder™ is the industry-leading operating platform for creating advanced, iSCSI-enabled networked storage devices.

Storing massive amounts of data has never been simpler. The high capacity, high density design packs 16 Serial ATA drives into a 3U chassis, for over 4 terabytes of capacity. As data needs grow, the solution is easily and cost-effectively scalable.

The iSCSI 1600 SATA offers an ideal solution for price sensitive environments that need performance, high reliability and scalability. Utilizing Serial ATA technology, the iSCSI 1600 provides point to point performance benefits and accommodates up to two 3Ware Escalade 8506 Series Serial ATA RAID controllers providing true hardware RAID and eliminating bottlenecks. Add to this the power of Intel® Xeon™ processors and you get the ultimate in performance and reliability.

To ensure data availability, the iSCSI 1600-SATA features include hot-swappable hard drives, power supplies, dual 10/100/1000 Ethernet interfaces, and RAID support for reliability and redundancy. The i1600-SATA supports both Linux and Windows platforms

Wasabi Software
Standards Compliance
Supports IETF iSCSI RFC, draft 20,

Error recovery levels
0

Supported Processors
Intel® XScale, IA32 and compatible (Pentium IV and Xeon processor) AMD Athlon X86 processor families and compatibles

Certified Reference Platforms


Certified Reference Platforms
Xeon: Intel SE7501HG2
Intel SE7501BR2
Intel SE7501WV2
Intel SE7501CW2
SuperMicro X5DPA-GG
Supermicro X5DP8

Memory Requirements Minimum recommended: 512 MB Maximum supported: 4 GB Full memory utilization to cache iSCSI block data

Supported hardware
SCSI, IDE, and Serial ATA controllers from Intel, Adaptec, and others Leading NICs and networking chipsets Leading SCSI and Serial ATA RAID cards from Intel, Adaptec, and others Multiport Ethernet cards:
Intel Ethernet Controller 85246, Intel Pro1000 XT, MT Intel and other leading iSCSI accelerator HBAs

Supported Networking
Gigabit Ethernet or 10/100 Ethernet (single or multi-port) TCP/IP v4 SLP and iSNS for iSCSI target discovery

Supported Volume Manager Features Span/chaining, RAID levels 0, 1, 4, 5, 10, 50 Support for volumes in excess of 1,000 terabytes Volumes may be partitioned into multiple virtual iSCSI disk nodes

Security
CHAP authentication, Password-protected web-based management

Administration
Web-based, password-protected user interface. Features configuration of network parameters, and configuration and management of virtual volumes and intelligent RAID controllers. Also provides “Expert Mode” for fine-tuning of iSCSI parameters. All supported features are configured through this graphic user interface. Configuration software is modular and can be extended using plug-ins.

Compatibility
Compatible with Cisco, UNH, and Microsoft software initators Compatible with Intel PRO/1000 T IP Storage Adapter Compatible with all other iSCSI Draft 20-compliant initiators Platform-agnostic: The Caen OS Kernel is the only module that needs to be ported to a different hardware architecture.

 

Hardware
System Drives
ATA/133 IDE 40 GB to 250 GB (5400RPM)
ATA/133 IDE 40 GB to 250 GB (7200RPM)
Slim CD-ROM/1.44”

RAID
RAID levels 0, 1, 5, 10, 50
Three 3Ware Escalade 8500 Serial ATA controllers
12 drives supported per controller
Support for 36 drives with 3 RAID
controllers

CPU
Intel® Dual Xeon (up to 3.2GHz)

Cache
512kb Integrated On-Die Level 2

Bus Speed
Up to 533 MHz

Motherboard
Dual Xeon Serverboard

Memory
Up to 16 GB of DDR-200 SDRAM

On-board Devices
Dual Ultra ATA/100 IDE channels
Two Intel® 82544 Gigabit Ethernet (copper)
On-board SVGA video

Expansion Ports
Two Fast 165550 UART Serial Ports
One ECP/EEP Parallel Port, USB 2.0 connectors
PS/2 Keyboard and Mouse connectors

Power Saving Features
APCI/APM power management
One Wake-On-Lan connector
Internal/External Modem Ring-on

Power Requirements
1200W 3+1 power supplies
Requires (2) 100-120V 50-60Hz AC @ 3A inputs

Cooling
(6) 200 CFM fans and (2) 87 CFM fans

Chassis
Rackmount version
Dimensions: 4U - 17.1”(w) x 30”(d) x 7” (h)

Warranty and Service
Two year return-to-manufacturer parts and labor
Two year 8x5x5 phone support

Download the printable PDF from our FTP site!

Please contact our sales team at sales@caeneng.com or our service department at support@caeneng.com if you want to find out more!

Caen Engineering, terms of service, Find an error on the site? Contact the Webmaster at danielle@caeneng.com. © 2005, Caen Engineering