home > products > RAID solutions > SATA RAID

All PDF forms require the free Adobe Acrobat Reader.

Highlights
 Two 2Gbps Fibre Host Channels per controller; Transfer rate up to 200MB/sec for each channel
 128MB pre-installed SDRAM
 Off Line Roaming
 Sixteen, hot-swappable, drive trays
 Drive side Fibre channel for expansion JBODs
 Hub embedded for JBOD cascading. Cascade up to seven JBODs
 DIP switch for hardware ID setting
 Host-side S.E.S emulation
 Pass-through command facility for drive FW downloading and other special functions
 HDD Plug-and-Play automatically scans drives on insertion, maps them to a proper ID and then generates a LIP on the loop
 Enhanced HDD-like SATA command emulation includes the following commands: Format, which restores controller-maintained defect list to the default list, Write-Verify, Verify and SMART

Overview
The Comet SATA 16 JBOD is the latest in Caen’s highly acclaimed line of FibreChannel (FC) -to-Serial ATA (SATA) products. Designed to accommodate a massive sixteen SATA hard drives, the Comet SATA 16J is a durable, high capacity, versatile JBOD that can be easily integrated with a large variety of other premier Caen FC-to-FC RAID devices and controllers.

The Comet SATA 16 JBOD comes with a single Caen FC-to-SATA JBOD controller and sixteen drive trays. The controller has two 2Gbps (FC-2G) host channels that are routed through two onboard hubs to four external SFP connectors, two per channel. While two SFP connectors can be connected to FC-2G host computers, the remaining two connectors can be cascaded to a second expansion JBOD. A total of seven Comet SATA 16 JBODs can be cascaded for unprecedented scalability.

The JBOD controller also comes with sixteen SATA channels that connect to the sixteen SATA drives installed in the front of the JBOD. The availability of separately purchased and individually installed SATA-to-PATA dongle kits enables the installation of PATA drives. This provides a less expensive option for an economic yet reliable JBOD.

With two redundant dual fan cooling modules and two redundant 460W powers supply units, the Comet SATA 16Js have been designed to operate with extreme reliability in today’s most demanding storage environments.

High Performance
Featuring a 64-bit 133MHz memory bus, the unparalleled bandwidth makes the JBOD’s high data throughput more than sufficient for small-to-medium sized servers or workstations. Data can be distributed at the burst rate up to 1066MB/sec. The dual independent PCI bus design virtually eliminates all imminent bottlenecks on IO traffic, providing sufficient throughput for a wide range of applications on workstations, Windows 2000/NT/XP, Linux, or Unix-based servers. These applications include disk-to-disk backup, Video on Demand, CCTV, stream editing and others.

Fault Tolerant Features
Hot-swappable active components:
All the active components; including the power supply unit (PSU) module, the cooling fan modules and the hard-drives are hot-swappable. If any of these components fail, they can be replaced without turning off the JBOD and disrupting the smooth operation of the JBOD.

Hot-swapping of drives:
A failed drive in the Comet SATA JBOD can be exchanged without turning off or interrupting the smooth operation of the JBOD. Once the failed drive is replaced the data will be rebuilt in the background. Hot-swapping is supported through the automatic disconnection from a failed drive and the detection of a reserve drive. All these failure recovery procedures are completely transparent to the host.

Specifications
JBOD Controller
 Standard 128MB cache memory in one SDRAM module.
 System Fan speed/Voltage/Temperature self-monitoring
 32KB NVRAM with RTC (Real Time Clock)
 Beeper

JBOD Operation
Drive hot-swapping

Host Interfaces
Two 2Gbps Fibre Channels

External Connections
Four SFP ports for optical Fiber connection
One RS-232C (Audio Jack) serial port connector
(38400, n, 8,1) (Diagnostic port. Used by technical support)

Enclosure Dimensions
Without Handles: 446.2W x 131H x 500Dmm
With Handles: 485W x 131H x 532Dmm

Download the printable PDF from our FTP site!

Please contact our sales team at sales@caeneng.com or our service department at support@caeneng.com if you want to find out more!

Caen Engineering, terms of service, Find an error on the site? Contact the Webmaster at marcom@caeneng.com. © 2009, Caen Engineering